Mcmurdo NAV6 Guia do Utilizador descarregar pdf (Página 46)

Nav6 Plus Navtex System User Guide

Connecting a PC, Printer or Plotter

Connecting a PC, Printer or PlotterConnecting a PC, Printer or Plotter

Connecting a PC, Printer or Plotter

The following equipment with RS232 serial data connection may be

connected to the Nav6:

• A PC (via ICS Cable option 6020.09).

• Or a printer or chart plotter (via ICS Cable option 6020.10).

The PC and printer serial port should be set to 4800 baud, 8 data

bits, no parity, 1 stop bit, and no flow control. A terminal emulator

program, such as HyperTerminal, can be used to monitor the data

output.

If you wish to make up your own PC interface cable please follow the

diagram below.

9 way “D” type female

pin number

Signal Nav6 display connection

1 No connection -

2 RX Black (Paired with brown)

3 TX Brown

4 No connection -

5 GND Black (Paired with red)

6 No connection -

7 No connection -

8 No connection -

9 No connection -

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 59 60

Sem comentários

Mcmurdo NAV6 Guia do Utilizador Página 46